Dynalink RTA100+, User Manual

Page: 27 / 88

Error! Style not defined. . Error! Style not defined.
21
If you change the LAN IP address information, you
must
commit the changes and then reboot the system to
activate them.
All other changes are activated when you commit them
(no reboot is needed).
Rebooting the device using Configuration Manager
If, after rebooting the device, you find that it does not operate
properly with the new configuration, you can reboot using options
that reactivate a previous configuration or the manufacturer’s
default configuration.
You can select from the following three options when rebooting:
Setting Description
Reboot Reboot the device to activate your new
settings (if any).
Reboot from Last
Configuration
Reboots the device using the current
settings in permanent memory, including
any changes you just committed.
Reboot from
Backup
Configuration
Reboots the device using settings stored
in backup memory. These are the settings
that were in effect before you committed
new settings in the current session.
Reboot from
Default
Configuration
Reboots the device to default settings
provided by your ISP or the manufacturer.
Choosing this option erases any custom
settings.