background image

Warranty

The warranty is granted on the following conditions: 

1. This warranty extends to the original purchaser (you) and is not transferable; 
2. This warranty shall not apply to software programs, batteries power supplies, cables or other 

accessories supplied in or with the product; 

3. The  customer  complies  with  all  of  the  terms  of  any  relevant  agreement  with  Dynalink 

Modems  Limited  and  any  other  reasonable  requirements  of  Dynalink  Modems  Limited 
including producing such evidence of purchase as Dynalink Modems Limited may require; 

4. The cost of transporting your product to and from Dynalink Modems Limited nominated 

premises is your responsibility; and, 

5. Dynalink Modems Limited does not have any liability or responsibility under this warranty 

where any cost, loss, injury or damage of any kind, whether direct, indirect, consequential, 
incidental or otherwise arises out of events beyond Dynalink Modems Limited reasonable 
control. This includes but is not limited to: acts of God, war, riot, embargoes, acts of civil or 
military authorities, fire, floods, electricity outages, lightning, power surges, or shortages of 
materials or labour. 

The warranty is automatically voided if: 

1. You,  or  someone  else  uses  the  product,  or  attempts  to  use  it,  other  than  as  specified  by 

Dynalink Modems Limited; 

2. The fault or defect in your product is the result of a voltage surge subjected to the modem 

either by power supply or communication line, whether caused by thunderstorm activity or 
any other cause(s); 

3. The fault is the result of accidental damage or damage in transit, including but not limited to 

liquid spillage; 

4. Your modem has been used for any other purposes than that for which it is sold, or in any 

way other than in strict accordance with the user manual supplied; 

5. Your modem has been repaired or modified or attempted to be repaired or modified, other 

than by a qualified person at a service centre authorised by Dynalink Modems Limited, or 

6. The serial number has been defaced or altered in any way or if the serial number plate has 

been removed. 

Summary of Contents for 56K e-modem III










Reviews: