8
Dynalco SST7000 Series Software
The Dynalco host software provides serial communication between a PC or laptop and the
SST7000 series. The software is compatible with Windows XP, Vista and Windows 7
operating systems. The SST7000 must be connected via Dynalco p/n 270A-XXXXX serial
communication cable. This cable is sold separately.
The Dynalco host software is available as a free download from our website:
www.dynalco.com/downloads
Following installation, a shortcut will be installed on your PC desktop. This application
software allows access to various screens for configuration of input signal sensitivity,
proportional output and relay logic / setpoints. Once the configuration parameters are set,
they can be programmed into the SST7000 and a spec file can be saved to the PC. This
saved spec file can then be loaded into another SST7000 if desired. Additionally, there is an
import function allowing uploading of the spec file from an SST7000 to the PC.
Configuration consists of the steps described in the following pages:
Summary of Contents for SST7000
Page 8: ...7 Outline Dimensions ...
