2
This manual covers both models SST7000 and SST7100:
SST7000
Speed Transmitter w/ 4 – 20 mA Output
SST7100
Speed Switch / Transmitter w/ 4 – 20 mA Output & Relay Trip
System Overview
The SST7000 speed transmitter is a DIN rail mountable product designed to convert
rotational speed (RPM) to an industry standard 4 – 20 mA analog output. The SST7100 also
provides 1 relay trip output for over / under speed alarm or shutdown.
Both models will accept a pulsed input from either a 2 or 3-wire speed sensor.
Programming:
The host software allows programming of the SST7000 series via a USB connection to a PC.
Additional Features
•
Repeater Output
•
0 – 1 mA local meter output
•
0 – 5 VDC / 0 – 10 VDC selectable proportional output
•
Isolated 4 – 20 mA proportional output
Specifications
1) INPUT SUPPLY VOLTAGE:
10 - 36 VDC, maximum 5 W
2) FREQUENCY INPUT:
a. Input Signal Frequency Range:
0 - 0.1 Hz to 0 – 50 KHz
b. Waveforms:
Accepts sinusoidal or square wave (positive or zero-
crossing)
c. Input Signal Sensitivity:
25 mV to 1.0 VRMS (selectable), Maximum allowed is
50 VRMS
d. Input Impedance:
10 K (minimum)
e. Approved Dynalco Sensors:
M201, M202, M231, M233, M203, M204, M205, M928
M928-24 & M951
Summary of Contents for SST7000
Page 8: ...7 Outline Dimensions ...
