15-023
www.powercommander.com
2012 HD V-rod PCV - 3
1
Remove the seat.
2
Remove the two bolts that hold on the rear fender cover (Fig. A).
3
Unplug the stock wiring harness from the ECM (Fig. B).
4
Plug the PCV in-line of the stock wiring harness and ECM (Fig. C).
5
Route the harness as shown in Figure C.
6
Use the supplied zip tie to secure the connectors in place.
FIG.A
FIG.C
Remove
Ground wire
FIG.B
