18
Chain and Rear Wheel Replacement (Continued)
Tools required: 4mm Allen key, 5mm Allen key, two 13mm wrenches (not included), 10mm
wrench, Phillips screwdriver (not included)
7. Ensure that the axle washers are
seated correctly against the frame. After
tightening the axle nuts with 13mm
wrenches, check wheel alignment and
the tracking of the chain by rotating the
wheel counter clockwise with your hand.
The wheel should spin freely and easily.
8. Retighten the brake arm bolt with a
Phillips head screwdriver and an 8mm
wrench.
9. Retighten the brake cable pinch
nut with a 10mm wrench. Refer to
the instructions on page 7 for proper
adjustment of the brake cable.
