16
HOW TO REPLACE THE POWER SWITCH
HOW TO REPLACE THE FOOT PEDAL
1
2
3
Power switch
+Mark
Red
Wire
Red Wire
Black Wire
Flat Head screwdriver
1. Remove the power switch with a flat head screwdriver.
2. Unplug the main connector from the wire terminals as shown in the photo.
3. Plug in the new power switch with the wire terminals for replacement as shown in
the photo.
– Plug one red wire terminal onto the contact pin marked with “+”.
– Plug in the other red wire terminal onto the opposite pin.
– Plug the black wire terminal onto the middle contact pin as shown in the
photo.
1. Insert a flat head screwdriver into slots and remove the pedal as shown.
2. Disconnect the pedal along with the cables under it.
3. Connect cables on new foot pedal, test to make sure it works, then click the pedal
back into place as shown.
