8
TOOLS REQUIRED:
ASSEMBLY
Your new vehicle requires adult assembly. Please set aside around 30 minutes for
assembly. Please identify all parts before assembly and save all packaging material
until assembly is completed to ensure that no parts are discarded.
17mm Socket Wrench
(included)
WARNING:
Children can be harmed by small parts, sharp edges and
sharp points in the vehicle's unassembled state, or by electrical items. In the
unassembled state, this package contains small parts. Adult assembly is required;
children should not handle parts, or help in assembly of the vehicle.
Phillips Screwdriver
(not included)
1. STABILIZER WHEEL
ASSEMBLY
• Fit one of the stabilizer wheels to the
vehicle body as shown.
• Insert the bolt into the hole in the stabilizer
wheel support, and through the vehicle
body.
• Fit the other stabilizer wheel on to the bolt
as shown.
• Slide a M10 locknut on the end of the bolt,
then tighten it with the attached socket
wrench.
NOTE:
Stabilizer wheel supports must be
attached as indicated, NOT at the rear axle.
WARNING:
Stabilizer wheels must be
installed before use. Do not operate without
stabilizer wheels. Do not remove stabilizer wheels.
M10
Nut
D
