6
and other parts. In the event such damage has occurred, the skateboard should not be
charged until the charger has been repaired by qualified personnel or replaced.
Use only the supplied, recommended charger.
Always use caution when charging.
The charger is not a toy and should be operated by an adult.
Never operate the charger near flammable materials or liquids, and operate the
charger in well-ventilated areas.
Disconnect the charger and unplug it from the skateboard when not in use.
Do not exceed the recommended charging time.
Always disconnect the charger from the skateboard prior to wiping down or cleaning the
skateboard with any liquid.
FAILURE TO HEED THE WARNINGS LISTED ABOVE INCREASES RISK OF
POTENTIALLY SERIOUS INJURY. USE THE APPROPRIATE CAUTION WHEN RIDING
AND ALWAYS WEAR PROTECTIVE GEAR.
1 wireless electric skateboard, fully assembled
1 hand-held wireless remote control
1 Battery charger
1 owner manual
Note:
To function the remote control one 9V alkaline battery is needed, which is not included
with the product.
Carton Contents
WARNING: DO NOT USE NON-ORIGINAL OR
NON-RECOMMENDED PRODUCTS WITH YOUR
ELECTRIC SKATEBOARD.
Altering of the original components
or the use of non-recommended replacement parts may or may not be
compatible with the design and will void the warranty and may cause an
unsafe condition resulting in serious injury or death.
Rider Capacity 145 lbs Dimensions 800x270mm
Range up to 6.21 miles on flat surfaces
Net weight 18 lbs.
Motor
24V DC / 150W Battery: 2*DC12V/4.5AH
Charger: Input - AC100-240V,50/60HZ Controller Wireless, handheld type
Output 24V DC / 600MA
-
Three position speed switch
-
Wireless handheld controller for 3-speeds acceleration
-
Torsion trucks
Specifications
Remember: ALWAYS ride within your limits and comfort zone and NEVER ride without protective gear!
USING THE CHARGER
The charger should be examined regularly for damage to the cord, plug, enclosure
PRE-RIDE SAFETY CHECKLIST
·
Check to make sure that all components are properly secured and are functioning
according to the manufacturer’s specifications.
·
Components must be maintained and repaired and only with the manufacturer’s
authorized replacement parts. Installation should be performed only by qualified
personnel.
·
Consider joining a club in your area and learning more about skateboarding safely;
Prove you are a good skateboarder; be conscientious and take care of yourself and
others.
