Dimensions
Installation/configuration notes
Installation (dual-channel amplifier)
Danger!
These installation instructions are for use by
qualified service personnel only. To reduce the
risk of electric shock do not perform any serv-
icing other than that contained in the owner’s
manual unless you are qualified to do so.
1. Switch off the power to the amplifier and remove the
mains lead.
2. Remove the 4 screws (1) from the top cover of the
amplifier.
3. Loosen the top cover as shown (2) and remove it by
pulling it out towards the front panel
4. Remove the cover panel from the rear panel (2
screws)
5. Lay the black cable as shown in following illustration.
3 | RCM-810
