Engineering Data Sheet
RCM-810
▪
Enable powerful control and supervision capabilities
▪
Integrate up to 100 devices in each remote control
network, 250 with multiple networks
▪
Freely programmable control inputs and outputs
▪
Load-monitoring for each channel
▪
EN 54-16: 2008
The RCM-810 Remote Control Module is an optional
module for supervision and remote control of power
amplifiers.
RCM-810 modules allow the amplifiers to be
integrated into a remote control network with up to
100 devices. Up to 250 amplifiers can be used in an
IRIS-Net project when multiple networks are used.
Apart from the network port, the RCM-810 also offers
freely programmable control inputs and control
outputs.
Additional RCM-810 features:
• Control/Configuration:
• Power ON/OFF
• Power On Delay
• Mute
• Control Inputs/Outputs
Supervision/Status indicators:
• Load supervision for each amplifier channel
• Output VU
• Protect
• Limit
• Pilot tone
• Temperature
• Gain/Sensitivity
• Control Inputs/Outputs
For further details please check the owner’s manual of
the amplifier which the RCM-810 will be used in.
Parts included
Quantity
Components
1
RCM-810
1
Ribbon cable (34-pole, 60 mm)
1
Euroblock connector 6-pole (Phoenix, MC 1,5/6-
STF-3,81, 1827745, F.01U.104.179)
4
Screw M3x10, combination TORX
1
Data sheet
TORX is a registered trademarks of Acument Intellectual Properties, LLC.
Technical specifications
Remote control and software
IRIS-Net, Multiple PCs possible,
MS Windows 2000, XP, Vista, 7,
8
Maximum configuration
250 Amplifiers in total, 100
Amplifiers per CAN bus, 1000
meter cable run
Amplifier supervision
Operation mode, temperature,
output voltage and current,
impedance of connected
speakers, protection mode
status, pilot tone detection
