Dynacord D 8A, Owner'S Manual

Page: 5 / 24

D 8A
5
2 Installation
2.1 Controls, Indicators and Connections
1 P
OWER ON
/
OFF INDICATOR
(POWER)
The POWER LED lights green if the mains switch
is ON and the mains cord is connected correctly.
2 M
AINS SWITCH
(ON/OFF)
Mains switch for switching the unit‘s power
ON or OFF. The POWER LED lights after
turning the power ON. Make sure that the
mains cord is correctly connected if the LED
is not lit upon turning the power on. If the
mains cord is correctly connected, mains
voltage is present and the LED does not light upon power-
on, please contact your local dealer.
3 M
AINS CONNECTOR
(MAINS IN)
The D 8A receives its power supply
via the mains input. A suitable 5 me-
ters long mains cord is supplied.
CAUTION: This applicance has no user-servicable parts
inside. Leave any servicing and maintenance
to qualified service technicians only.
1
2
3
4
5
6
7
8
9
10
LO-CUT
Number Description
1 Power on/off indicator (POWER)
2 Mains switch (ON / OFF)
3 Mains connector, lockable (MAINS IN)
4 Limit indicator (LIMIT)
5 Master level control (MASTER)
6 Microphone level control (MIC)
7 Input connector for microphone level audio signal (MIC IN)
8 Mode selection switch (LO-CUT / FULLRANGE)
9 Input connector (XLR or phone) for line level audio signal (LINE IN)
10 Output connector for line level audio signal (MASTER OUT)