Notice!
Controlling multiple amplifiers via Dynacord control software: It is recommend to use a powered
USB hub if the user wishes to control amplifiers with one cable to their computer. USB range
extenders can also be used to remotely position the software control interface longer distances
from the amplifiers.
Due to the great number of USB hubs and extenders, it is not possible to verify and test all
brands and models for use with this product.
To find current user documentation, firmware, or software visit our product related
information at www.dynacord.com.
Factory presets
L Series and C Series amplifiers have a selection of factory presets on board. These are
generic settings to be used as a starting point for configuration that do not require a
dedicated speaker setting, but only some basic sound adjustments. The following content is
based on the first release, future firmware updates might include additional or updated
settings.
Name
Input Routing
Parameters
F01
Linear Dual
In A > Out A
In B >Out B
All flat, no links
F02
Linear Mono A In A > Out A
In A >Out B
All flat, no links
F03
Stereo Linked In A > Out A
In B >Out B
All flat, CH A & B linked
F04
Sub & Top #1
In A > Out A
In A > Out B
BW18dB x-over @ 100Hz
F05
Sub Stereo #1 In A > Out A
In B >Out B
BW18dB Lo-Pass @ 100Hz
F06
Top Stereo #1 In A > Out A
In B > Out B
BW18dB Hi-Pass @ 100Hz
F07
Sub & Top #2
In A > Out A
In A > Out B
LR24dB x-over @ 100Hz
F08
Sub Stereo #2 In A > Out A
In B > Out B
LR24dB Lo-Pass@ 100Hz
F09
Top Stereo #2 In A > Out A
In B > Out B
LR24dB Hi-Pass @ 100Hz
F10
LPN Stereo
In A > Out A
In B > Out B
LPN filter for enhanced LF
Table 7.2: L Series factory presets
Name
Input Routing
Parameters
F01
Linear Dual
In A > Out A
In B >Out B
All flat, no links
F02
Linear Mono A
In A > Out A
In A >Out B
All flat, no links
F03
Stereo Linked
In A > Out A
In B >Out B
All flat, CH A & B linked
F04
HP50Hz-Dual
In A > Out A
In B >Out B
Hi-Pass 18dB @ 50Hz
F05
HP50Hz-Mono
In A > Out A
In A >Out B
Hi-Pass 18dB @ 50Hz
F06
HP50Hz-Stereo In A > Out A
In B >Out B
Hi-Pass 18dB @ 50Hz, CH A &
B linked
F07
LPN Stereo
In A > Out A
In B >Out B
LPN filter for enhanced LF
C1300FDi
7.3
26
en | Power amplifier menu navigation
L Series and C Series FIR-Drive Power
Amplifiers
2017.10 | 02 | F.01U.327.801
Installation manual
Bosch Sicherheitssysteme GmbH
Summary of Contents for C1300FDi-AU
