OSD Setup Manual
50
Configuration
The Configuration menu can be used to restore the default factory settings, import / export
configuration, and view / export system log. Select <Configuration> from the Main Menu,
and the following menu is displayed. Items in this menu are described in the following
subsections.
Configuration
Load Factory Default
Import Config
Export Config
System Log
Operation Log
No
Off
< Load Factory Default >
This item is to load the factory default setting. Select <Yes> to restore the factory default
setting from the
“read-only” memory, or select <No> to cancel.
< Import Configuration >
This item allows users to load a DVR configuration that is saved in an external drive. To
import a configuration that was previously exported, make sure the device with the saved
configuration is connected to the DVR. Select <Import Config> from the Configuration
menu. The following menu is displayed.
Import Config
Config Name
xxxx-xxxx
xxx-xx
Select
No
No
Select one of the available configuration files, and choose <Yes> to start importing the
configuration.
NOTE:
If the record mode of the imported configuration is different from the DVR
’s
current configuration, a warning message
“Warning!! System will reboot if record
mode differ
” will be shown.
NOTE:
DO NOT
remove the external device used for importing configuration before
the DVR completely reboots, otherwise it will be formatted.
