User’s
Manual
36
4.6.5
Setting Preset Points
The Dyna
Guard
TM
090 Series DVR allows user to set preset positions; the
amount of preset points depends on the dome manufacturer.
Follow the steps to set preset points.
•
Press a Channel key to view the corresponding camera in full screen.
•
Then press DOME to enter dome control mode.
•
Use Direction keys to position the dome camera to desired position.
•
Press 2 to view the dome control Hint Screen; press 2 again to toggle the
Hint Screen.
Hint Screen
DOME / ESC: Exit
MODE / PLAY: Iris Open / Close
SEQ / FREEZE: Focus Near / Far
MENU / SEARCH: Zoom In / Out
ENTER: Auto Focus / Iris
◄▲▼►
: Pan / Tilt
CH1: Set / Go Preset
CH2: Hint Screen On / Off
Dome Control
•
Press 1 to access the Set/Go Preset function. The Dome Preset menu is
displayed.
Dome Preset
Index
1
2
3
4
5
6
7
Set Preset
NO
NO
NO
NO
NO
NO
NO
Go Preset
NO
NO
NO
NO
NO
NO
NO
•
Use UP / DOWN keys to select the desired preset number from the menu.
•
Set the <Set Preset> of the selected preset number to <YES>, and press
ENTER to save the position. Now the preset is set and ready to call.
