User’s Manual
19
3.3
Entering OSD Setup Menu
The OSD Main menu contains a list of items that are used to configure the
Dyna
Guard
TM
090 Series DVR. To enter the Main menu, press MENU and
then enter Administrator or User password. The Password Verification screen
displays as follows.
Password Verification
________
Press Channel Keys To Enter Password
(4-8 Digits)
Press
◄
Key To Delete
The default passwords are shown in the following table. The same passwords
are used for entering the remote viewing software Dyna
Remote
Lite.
Administrator Password
User Password
1 2 3 4
4 3 2 1
NOTE:
It is strongly suggested to change the passwords to prevent
unauthorized access to the unit.
After entering the correct password, the Main menu is displayed.
Main Menu
1. System Setup
2. Monitor Setup
3. Camera Setup
4. Record Setup
5. Sequence Setup
6. Event Setup
7. Database Setup
8. Configuration
9. Shutdown
Move the cursor up / down over the OSD items using the Direction keys and
press ENTER to enter the selected sub-menu.
