7
Control Buttons in Dome Camera Control Panel:
Icon
Description
Icon
Description
Iris Open
Iris Close
Focus Near
Focus Far
Zoom Out
Zoom In
Set / Go Preset Points
Return to Live Mode
Move the Lens to the Left
Move the Lens to the Right
Move Up the Lens
Move Down the Lens
Auto Focus
Basic Playback Operation
Search By Time:
Click on
SEARCH
to enter the Search menu.
Click on
“From”, and playback will start from the beginning of the database.
Click on
“End”, and playback will start from the end of the database.
Click on
“Select” and choose date or time field. Click on the
UP/DOWN
buttons to adjust the
values. Click on
“Select” again to confirm or right click to abort.
Click on <
Begin Playback
> to start playing back recorded video of the selected time. Click on
PLAY/STOP
again to return to live video.
NOTE:
If there is no available recorded video that matches the specified time and date,
the unit starts to playback from the next available video.
Calendar Search:
Click on
SEARCH
to enter the Search menu.
Click on <
Calendar Search
> and a calendar will show up.
Select any shaded date, which means recording data are available. The table shown on the left
will display available videos of each channel within the selected date.
The videos are classified into four categories:
Normal
,
Motion
,
Alarm In
and
Video Loss
,
shown as four different tabs on the top.
Then select a preferred time from the time bar. Alternatively, specify the values of date / hour /
minute / second under <
Select
> on the bottom-right corner.
