DynaColor 960H H.264 DVR, Setup Manual

Page: 10 / 12

10
Connect the DVR via the Remote Software
Setup Requirements:

Make sure the PC is connected to the Internet.

Obtain the IP address of the 960H H.264 DVR . To check the IP address of the DVR, click on
MENU and select < System >

< Network Setup >

< LAN Setup >

< IP > to check the IP.
Changing Internet Setting:
The 960H H.264 DVR only supports 32-bit IE browser. However, the DVR does not support IE
browser under WinMetro mode.

Start the IE; select < Tools > from the main menu of the browser, then < Internet Options > and
then click the < Security > tab.

Select < Trusted Sites > and click < Sites > to specify its security setting.

Uncheck
“Require server verification (https:) for all sites in this zone”. Type the IP address of the
unit in field and click < Add > to add this website to the zone.

In the Security Level area, click < Custom Level >. Under < ActiveX controls and plug-ins >, set
all items to < Enable > or < Prompt >.

Click < OK > to accept the settings and close the < Security Settings > screen.
Using the Remote Software:

Start the IE and enter the IP address of the 960H H.264 DVR in the address bar.

The ActiveX controls and plug-ins dialog will show up twice for confirmation; click < YES > to
accept ActiveX plug-ins. The DVR Remote plug-ins will be downloaded and installed on the PC
automatically when the connection is successfully made.
NOTE: Do not enter any leading
“0” characters in the address, for example,
“192.068.080.006” should be entered as “192.68.80.6”.
NOTE: If the default trigger port 80 is changed to another port, e.g. port 81, the IP
address should be entered as
“192.68.80.6
:81
”.

Version verification starts automatically to verify whether DVR Remote was installed. This
process may take up to 30 seconds.

When the software is completely downloaded and installed, the Login Window is displayed.

Enter username and password. The default username and password is admin and 1234 .