One Year Warranty
Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user within one year from the date
of purchase, all equipment of our manufacture is warranted against defects in workmanship and materials under normal use and service. We shall repair or
replace at our factory, any equipment or part thereof which shall, within one year after delivery to the original purchaser, indicate upon our examination to have
been defective. Our obligation is contingent upon proper use of Dynabrade tools in accordance with factory recommendations, instructions and safety
practices. It shall not apply to equipment which has been subject to misuse, negligence, accident or tampering in any way so as to affect its normal
performance. Normally wearable parts such as bearings, contact wheels, brushes, gears, etc., are not covered under this warranty.
3
Abrasive Impregnated Non-Woven Nylon
A non-woven synthetic fiber and an abrasive mineral are bonded together to
form a tough, open web that is chemically resistant and long-lasting. This web
design allows controlled conformable contact to workpiece contours, corners
and edges. The product wears away slowly, exposing new abrasive leaving a
uniform, consistent surface. It also conditions surfaces without removing or
damaging the base material and is excellent for deburring, cleaning, blending
and final finishing of metal, wood and plastics. It is available in many forms such
as belts, discs and wheels. Various mineral grades are available
ranging from very coarse to ultra-fine.
Cloth Polishing Belts
Used on power tools in conjunction with Dynuba
®
polishing compounds. The
result is brilliant cut, color and luster on metals such as stainless steel,
aluminum, copper and brass.
Aluminum Oxide
The most widely used abrasive grain. This tough durable synthetic is used for
grinding and deburring high carbon steels, general metalworking and for
sanding certain hardwoods.
Ceramic Aluminum Oxide
Synthetic grain two-to-three times tougher than conventional aluminum oxide.
Silicon Carbide
Excellent for sanding primer and sealer. This sharp, fast-penetrating grain is
used for sanding soft materials such as plastics and fibrous wood.
Alumina Zirconia
Effective for coarse stock removal of metal and wood. This synthetic grain has
self-sharpening characteristics and provides continuous new cutting edges for
longer life and greater efficiency.
Abrasive Types and Cloth Polishing Belts
All abrasive accessories may be found in the most current Dynabrade
®
Catalog and abrasive literature.
Abrasive Belt/Contact Arm Change Instructions
(Ref pg. 4)
To Change Belt:
To Change Contact Arm Assembly:
1.
Disconnect tool from the power source.
1.
Disconnect the tool from the power source.
2.
Loosen the
15329
Screw and remove the
15312
Belt Guard.
2.
Loosen the
15329
Screw and remove the
15312
Belt Guard.
3.
Pull back the
15306
Tension Arm and remove the abrasive belt.
3.
Pull back the
15306
Tension Arm and remove the abrasive belt.
4.
Install a new abrasive belt, and the
15312
Belt Guard.
4.
Loosen the
95218
Adjustment Knob to remove the contact arm assembly.
5.
Adjust belt tracking by turning
95218
Adjustment Knob to the left or right
5.
Install the desired contact arm assembly (Ref pg. 6) so that the tab on the
accordingly, so as abrasive belt rides evenly over contact arm.
end of the arm faces toward the
15306
Tension Arm.
6.
Connect tool to power source.
6.
Fasten the contact arm assembly in place with the
95218
Adjustment Knob.
7.
Install a new abrasive belt, and the
15312
Belt Guard.
8.
Adjust the belt tracking by turning the
95218
Knob.
Housing Angle Adjustment:
To pivot the
15372
Belt Housing Assembly, use a 9/64" hex key to loosen the
95311
Screw. Pivot the belt housing assembly to the
desired position and retighten screw.
Installing Side Handle:
The
89351
Side Handle may be installed on either side of the gearbox housing, for right or left hand operation. To install, thread side handle
into socket and tighten securely.
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
