manualshive.com logo in svg

Dynabrade Dynafile 14000, Safety, Operation And Maintenance Manual

Share
Download
Dynabrade Dynafile 14000 Safety, Operation And Maintenance Manual Download Page 9

Belt Size: 

1/4" W x 24" L.

11066 Contact Wheel: 

5/16" diameter x 1/8" wide, steel. 

11034 Platen: 

1/4" wide.

11212

File round openings as small as 7/16".

45 PSIG maximum.

Belt Size: 

1/2" W x 24" L.

11068 Contact Wheel: 

5/16" diameter x 3/8" wide, steel. 

11027 Platen: 

1/2" wide.

11213

See 

11239 

for heavy-duty version.

45 PSIG maximum.

Belt Size: 

1/2" W x 24" L.

11070 Contact Wheel: 

7/16" diameter x 3/8" wide, rubber.

11025 Platen: 

1/2" wide.

11214

Work on contact wheel or Dynapad

®

.

45 PSIG maximum.

Belt Size: 

1/4" W x 24" L.

11072 Contact Wheel:

7/16" diameter x 1/8" wide, brass. 

11034 Platen: 

1/4" wide.

11215

Enter 1/2" x 1/2" openings.

Belt Size:

1/4" W x 24" L.

11074 Contact Wheel: 

5/8" diameter x 1/8" wide, rubber. 

11032 Platen: 

1/4" wide

.

11216

Enter 5/16" x 3/4" openings.

Belt Size: 

1/2" W x 24" L.

11076 Contact Wheel: 

7/16" diameter x 3/8" wide, steel. 

11027 Platen: 

1/2" wide.

11217

Enter channels as narrow as 9/16".

11218

Standard arm on model 

14000

.

See 

11228 

for heavy-duty version.

Dynafile

®

Standard Contact Arms

Standard Contact Arms allow for a 4" workable reach.

9

Belt Size:

1/2" W x 24" L.

11078 Contact Wheel: 

5/8" diameter x 3/8" wide, rubber. 

11025 Platen: 

1/2" wide.

Belt Size: 

1/4" or 1/2" W x 24" L.

11080 Contact Wheel: 

1" diameter x 3/8" wide, radiused rubber.

No Platen

11219

No platen due to offset design.

Grind radiuses, slack polish.

Offset for slack polishing

Belt Size: 

1/2" W x 24" L.

11078 Contact Wheel:

5/8" diameter x 3/8" wide, rubber. 

11025 Platen: 

1/2" wide.

11228 Heavy-Duty Steel

Optional 

11028 

Steel Platen

available for grinding.

Belt Size: 

1/2" W x 24" L.

11084 Contact Wheel: 

3/4" diameter x 1/2" wide, rubber. 

11135 Platen: 

1/2" wide.

11231

See 

11243 

for heavy-duty version.

Belt Size: 

1/8" or 1/4" W x 24" L.

11086 Contact Wheel: 

1" diameter x 3/8" wide, tapered urethane.

No Platen.

11232 For 1/8" Wide Belts

No platen due to offset design.

Grind corners, strap polish.

V-Tapered

Belt Size: 

1/2" W x 24" L.

11068 Contact Wheel: 

5/16" diameter x 3/8" wide, steel. 

11027 Platen: 

1/2" wide.

Belt Size: 

1/2" W x 24" L.

11084 Contact Wheel:

3/4" diameter x 1/2" wide, rubber. 

11135 Platen: 

1/2" wide.

11243 Heavy-Duty

Grind over contact wheel or Dynapad

®

.

11239 Heavy-Duty Steel

Grind in narrow areas.

45 PSIG maximum.

Belt Size: 

1/2" W x 24" L.

11078 Contact Wheel:

5/8" diameter x 3/8" wide, rubber. 

11026 Platen: 

1/2" wide.

11262 "Offset Arm"

For flat grinding using platen at or near corners 

and edges of large radius round. Contact wheel

is offset to prevent gouging.

Summary of Contents for Dynafile 14000













Reviews:

No comments

Brands by name

Popular brands

Load more brands