manualshive.com logo in svg

Dynabrade Dynafile 14000, Safety, Operation And Maintenance Manual

Share
Download
Dynabrade Dynafile 14000 Safety, Operation And Maintenance Manual Download Page 10

11237

and

11238 Turbine Blade Arms 

45 PSIG maximum.

11257, 11178

and

11179 Spear Arms

1-1/2"

11234 Double-Burrer Arm

•

Deburrs both edges of

workpiece simultaneously.

•

Contact wheels adjust for

material 1/8" to 5/8" thick.

Belt Size:

1/2" wide x 34" long.

11080 Contact Wheels:

1" diameter x 3/8" wide, rubber.

11240, 11241, 11244 

and 

11245 Extra-Length Arms

11254 Big Wheel Arm

•

Grinds and polishes deep

slots or narrow groves.

•

1/4" to 1/2" wide wheels,

2-1/8" to 4-3/4" diameter
(specify size).

Belt Size:

1/4" to 1/2" W x 34" L. 

11253 Arms (specify width)

11377 Contact Wheel: 

2-1/8" dia. x 1/2" wide, urethane.

11378 Contact Wheel: 

2-1/8" dia. x 1/4" wide, urethane.

11254 Arms (specify width)

11375 Contact Wheel: 

4-3/4" dia. x 1/2" wide, urethane.

11375 Contact Wheel: 

4-3/4" dia. x 1/4" wide, urethane.

11255 Cross-Bow Arm

•

I.D. polishing or deburring

with one 180° wrist turn.

•

Deburr leading radius of

1" to 4" round openings.

Belt Size: 

1/2" W x 34" L.

Dynafile

®

Specialized Contact Arms

Designed to solve tough production problems.

11237:

1/4" wide x 24" long belts. 

11066 Contact Wheel: 

5/16" dia. x 1/8" wide steel wheel.

11238: 

1/2" wide x 24" long belts.

Contact Wheel:

1/4" dia. x 3/8" wide steel wheel.

Strap Polish 

Area

9" Workable Reach:

11240 Arm:

11241 Arm:

Belt Size: 

1/2" W x 34" L belts.

Belt Size:

1/4" W x 34" L belts.

11078 Contact Wheel:

11074 Contact Wheel: 

5/8" dia. x 3/8" wide, rubber.

5/8" dia. x 1/8" wide, rubber.

14" Workable Reach:

11244 Arm:

11245 Arm:

Belt Size: 

1/2" W x 44" L belts.

Belt Size: 

1/4" W x 44" L belts.

11078 Contact Wheel:

11074 Contact Wheel: 

5/8" dia. x 3/8" wide, rubber.

5/8" dia. x 1/8" wide, rubber.

10

11257:

Custom-made. Specify usable length up to 32".

Specify 

11068 

- 5/16" diameter steel or 

11078 

- 5/8" diameter rubber 

contact wheel.

11178:

Has 9" reach with 11068 - 5/16" diameter steel contact wheel.

Belt Size:

1/2" W x 34" L (45 PSIG Max.). 

11179:

Has 9" reach with 

11078 - 

5/8" diameter rubber contact wheel.

Belt Size:

1/2" W x 34" L.

Belt Size:

1/2" W x 24" L.

11078 Contact Wheel:

5/8" diameter x 3/8" wide, rubber.

Platen:

1/2" W x 7/8" L.

11258 Stroke Sander Arm

Blend stainless steel.

Belt Size:

1/2" W x 24" L, 60 to 80 grit.

11090 Contact Wheel:

5/8" diameter x 3/8" wide rubber.

•

Guide wheels

prevent undercutting.

•

Removes raised material

within .020" or less.

•

Use 60 to 80 grit abrasive

belts with this arm.

11297 Guide-Cut Arm

Summary of Contents for Dynafile 14000













Reviews:

No comments

Brands by name

Popular brands

Load more brands