Page
16
of
19
12.0
CLEANING AND MAINTENANCE
WARNING:
Disconnect the power cable before performing any servicing or
maintenance of the vacuum cleaner
.
a.
Empty and clean the recovery tank when necessary, but also after every use.
b.
Dispose of collection bag when full and replace by a new collection bag
c.
The HEPA filter should be replaced yearly, or every two years, depending on the use.
d.
Wash the cloth filters regularly with warm water. No detergent required.
IMPORTANT:
Make sure that the cloth filters are completely dry before reinstalling
them in the vacuum cleaner.
e.
The cloth filters should be replaced every two or three years depending on use.
f.
Inspect the cloth filters regularly. If the cloth filters are torn, replace immediately. A torn
filter will allow dust and other materials to enter the motor and may cause pre-mature
wear of the motor
g.
Keep the power cable clean and inspect it regularly for cuts or cracks
WARNING:
When carrying out service or repair operations, all contaminated
items which cannot be satisfactorily cleaned, are to be disposed of;
such items shall be disposed of in impervious bags in accordance
with any current regulation for the disposal of such waste;
WARNING:
Do not use the HEPA filter after removal out of the appliance.
13.0 MOTOR
MAINTENANCE
The motor used in this vacuum cleaner is designed for maintenance free operation and does
not need to be serviced.
14.0 STORAGE
a. It is recommended that the inside of the recovery tank be clean and dry when storing the
vacuum cleaner.
b. The suction intake must be closed using the storage cap provided with the vacuum
cleaner.
