Page
12
of
19
9.0 OPERATING INSTRUCTIONS - FOR DRY RECOVERY
WARNING:
This vacuum cleaner is designed for the recovery of dry materials
only. Do not recover liquids.
1. Disengage the latches and remove the power head from the recovery tank.
2. Place the poly liner (item # 7 on Fig. 1) at the bottom of the tank
3. Place the collection bag (item # 6 on Fig. 1) in the recovery tank on the air intake
4. Place the main cloth filter (item # 5 on Fig. 1) on the recovery tank. Make sure that the
filter's gasket covers the circumference of the recovery tank lip.
IMPORTANT:
Do not use this vacuum cleaner for dry recovery if the cloth filters
are not installed
5. Place the power head on the recovery tank and fasten the latches.
6. Connect the airline hose of one or two suction/air hose to the air outlets placed on the
vacuum cleaner
7. Fasten hose to suction intake on side of recovery tank and attach desired
sander/pneumatic tools to hose.
Air outlets
