background image

Optional Accessories

Dynaswivel

®

Swivels 360° at two locations which 
allows an air hose to drop straight to 
the floor, no matter how the tool is held.

94300: 

1/4" NPT.

96505 Motor Tune-Up Kit 

Includes assorted parts to 
help maintain and repair motor.

Dynabrade Air Lube

Formulated for pneumatic equipment.

Absorbs up to 10% of its weight in water.

Prevents rust and formation of sludge.

Keeps pneumatic tools operating longer
with greater power and less down time.

95842: 

1 pt. (473 ml)

95843: 

1 gal. (3.8 L)

Wrenches

95262 

– 14mm open-end

Used On Model 

52196

95263 

– 17mm open-end

Used On Model 

52590

95281 

– 19mm open-end

Used On Model

52196

52296 Repair Collar

Specially designed collar for use in vise to
prevent damage to valve body during 
disassembly/assembly.

57092 Repair Collar

Specially designed collar for use in vise to
prevent damage to motor housing during 
disassembly/assembly.

57091 Bearing Press Tool

Use with a #2 arbor press to achieve
accurate press of bearings and motor parts.

96525 Tool Repair Kit

Includes special tools for proper
disassembly/assembly of the tool.

Includes all above listed tools.

56058 Lock Ring Wrench

Lock Ring Tool has a 3/8 in. square socket
for use with 3/8 in. drive; breaker bar,
ratchet head, or torque wrenches.

DYNABRADE, INC.

www.dynabrade.com

8989 Sheridan Drive  

Clarence, NY 14031-1419  

Phone: (716) 631-0100  

Fax: 716-631-2073  

International Fax: 716-631-2524

© DYNABRADE, INC., 2013

PRINTED IN USA

PD13.01_01/13

Government Printing Office (GPO)

Superintendent of Documents  •  Attn: New Orders
P.O. Box 371954  •  Pittsburgh, PA 15250-7954  •  Tel: 1 (202) 512-
1803

International Organization of Standards (ISO)

Case postale 56  •  CH-1211 Geneva 20
Tel: + 41 22 749 01 11  •  Fax: + 41 22 749 09 47

American National Standards Institute (ANSI)

1899 L Street, NW, 11th Floor  •  Washington, DC 20036
Tel: 1 (202) 293-8020

Compressed Air & Gas Institute (CAGI)

1300 Sumner Ave.  •  Cleveland, OH 44115-2851
Tel:  1 (216) 241-7333  •  Fax. (216) 241-0105

REFERENCE CONTACT INFORMATION

Summary of Contents for 52196

Page 1: ...6 01470 Insert Assembly 17 01448 Throttle Lever 01462 Safety Lock Lever 18 12132 Spring Pin 19 01449 Valve Stem 20 95558 Retaining Ring 21 52606 Housing 52196 52607 Housing 52590 22 95730 O Ring 23 01024 O Ring 24 01469 Speed Reg Assembly 25 01464 Seal 26 01472 Tip Valve 27 01468 Conical Spring 28 01564 Air Control Ring 29 95711 Retaining Ring 30 01578 Inlet Adapter 31 01486 Felt Silencer 2 32 960...

Page 2: ...ntenance Schedule for a guide to expectant life of component parts 7 Mineral spirits are recommended when cleaning the tool and parts Do not clean tool or parts with any solvents or oils containing acids esters keytones chlorinated hydrocarbons or nitro carbons 8 DO NOT clean or maintain air tools with chemicals that have a low flash point example WD 40 Full One Year Warranty Following the reasona...

Page 3: ...otor There is no need to set or adjust the gap between the rotor and the end plates 5 Place 56073 Vanes in slots on 57090 Rotor 6 Place the 54806 Cylinder over the 54808 Rotor The short line up pin goes toward the 54809 Front Bearing Plate 7 Place 58359 Rear Bearing Plate and 58368 Bearing over shaft and long end of line up pin and press into place 8 Make certain threaded end of 54808 Rotor Shaft ...

Page 4: ...sembly 57091 Bearing Press Tool Use with a 2 arbor press to achieve accurate press of bearings and motor parts 96525 Tool Repair Kit Includes special tools for proper disassembly assembly of the tool Includes all above listed tools 56058 Lock Ring Wrench Lock Ring Tool has a 3 8 in square socket for use with 3 8 in drive breaker bar ratchet head or torque wrenches DYNABRADE INC www dynabrade com 8...

Reviews: