Disassembly Instructions - Wet, Stone Polisher
Model: 51520
Important:
Use these instructions along with tool parts page or manual.
Notice:
Shut off air supply and depress throttle lever to deplete air.
Disconnect tool from air supply hose.
Shut off water supply faucet and disconnect.
Remove all accessories (abrasive product, backup disc, and flanges) from tool.
Motor Disassembly:
1.
Push against collar of
96227
Fitting
and pull
95579
Water Line tubing from fitting.
Summary of Contents for 51520
