CAUTION
:
Do not touch the connectors on SSD and in the computer with your
bare hands. SSD can fail if they are contaminated with sweat, natural oils, etc. from
your hands.
4.4 SSD
Removing SSD
Remove SSD according to the following procedures and Figures 4-13.
1. Remove thermally conductive pad
2. Remove one M2.0x2.5x5.0 black Phillips head screw securing the SSD.
3. Pull SSD from CN8 on system board.
Figure 4-13Removing SSD
Installing SSD
Install SSD according to the following procedures and Figures 4-13.
1.Insert SSD into CN8 on system board.
2.Secure it with one M2.0x2.5x5.0 black Phillips head screw.
3.Install thermal sillicagel
