2
1
1
CN6290
Speaker Harness
Figure 4-25 Installing the Click pad
3. Stick a new
AL TAPE
to the Click pad and Click Pad RIM ASSY.
4. Connect the
Click Pad FFC
and
Fingerprint FFC
to the connector on
the Click Pad and the connector
CN9510
and
CN9550
on the
System
Board
.
4.21 Speaker
4.21.1 Removing the Speaker
To remove the Speaker, follow the steps below and refer to
Figure 4-26
to
Figure 4-27
.
1. Disconnect the
Speaker harness
from the connector
CN6290
on the
system board.
2. Open the stick tapes. Release the
Speaker harness
from the guides.
Figure 4-26 Removing the Speaker (1)
