Dynablast MHG500PSQ, Operator'S Manual

Page: 3 / 17

SAFETY INSTRUCTIONS
1. Read all safety and operating instructions before using the unit.
2. Read warnings on additive containers.
3. Ventilate work area when using toxic or pungent additives to eliminate your expo sure to
toxic fumes.
4. Use protective wear, especially for the eyes and skin.
5. Be careful of slippery floors. Some additives make a normally safe area extremely
slippery and dangerous.
6. Keep children and animals away from the machine and wash area.
7. DO NOT change nozzle size. Each machine is designed to operate with a specific size
nozzle. An incorrect nozzle could cause excessive pressure resulting in pump damage
and possible personal injury. Refer to parts list for correct nozzle size.
8. DO NOT point the nozzle toward an electrical outlet as you risk severe shock and personal
injury
9. Never run the unit in an enclosed area. Exhaust fumes are poisonous.
10. Whenever you stop spraying, always engage the safety latch on the trigger gun.
11.
CAUTION - When changing nozzles, always turn the motor or engine off and
always relieve the pressure by triggering the gun. Always engage the safety latch
on the trigger gun. Always change the nozzle with the gun and wand pointed away
from you, and never pointed at yourself or at any other persons or animals.
12. DO NOT smoke when handling fuel.
13.
DO NOT ABUSE
the high pressure hose by driving over it. The hose may rupture and
injure an unsuspecting passer-by.
14. WARNING- If you smell gas, shut off the gas supply to the appliance, extinguish
any open flame, and test all joints with a soap solution. If the odor persists, call
your gas supplier immediately.
WARNING- Risk of severe personal injury keep clear of nozzle. Do not direct
discharge stream at yourself or at any other persons or animals. The water
discharge from this unit is under extreme pressure and heat (heat, when hot water
washing). This equipment is to be used only by trained operators.
1
SQN/P SERIES