RP400/RP800/RP1600
Power Packs
3 .
1.
AC On / Off Power Switch - Turns power
pack on and off. Also offers a dual propor-
tional dimmer slide switch for modeling
light control, including Full Off, so that the
cooling fan can continue to run.
2.
Two stop Variator Control - Fine-tune your
power settings in 0.2 stop detented incre-
ments. Used in combinations, the power
control switches and Variator provide a total
of 15 different power settings with a single
flash head.
3.
Power Control Switches – Three position
full/half/quarter power switches provide
power settings over a three stop range per
channel. (These can be trimmed using the
Variator or combined using the Ratio output
switch.)
4.
Flash Head Outlets – The RP packs are
capable of accepting up to three heads. All
outlets are arc protected. This means that it
is completely safe to plug and unplug flash
head cables into the outlets even while the
pack is on.
5.
AC Power Cord Socket and Circuit Breaker - Offers easily rest-able protection.
6.
Ratio/Combined Output Switch - An indicator light tells you whether your power is routed symmetrically or asymmetrically
between the “A” and “B” flash head outlet banks.
7.
Sync Input Socket – ¼” Phono style jack for plugging in sync cord, slave or optional radio slave.
8.
Ready Light/Test Switch - When lit the pack is fully charged. This button can also be used to manually trigger the pack.
9.
Audible Ready Indicator Switch- Get audible confirmation that the pack is fully recycled to full power
5. (back)
2.
4.
6.
1.
9.
8.
7.
