19
To clean the print head
Clean the print head using the cleaning tool located inside the label
compartment lid. If you do not have a cleaning tool, contact DYMO
Customer Care (http://support.dymo.com).
Troubleshooting
Review the following possible solutions if you encounter a problem
while using your labelmaker.
Problem/Error Message
Solution
No display
• Ensure the labelmaker is turned on.
• Replace discharged batteries.
Poor Print Quality
• Replace discharged batteries.
• Ensure label cassette is installed properly.
• Clean the print head.
• Replace the label cassette.
Poor Cutter Performance
Clean the cutter blade. See
Caring for Your
Labelmaker
.
Printing
No action required.
Message disappears when printing is finished.
Too many characters
Exceeded maximum number of
characters in buffer.
Delete some or all of the buffer text.
Battery low
Batteries almost discharged.
Replace batteries.
Summary of Contents for LetraTag 100-H
Page 20: ...21...
