Dymo DYMOLM200, Instructions For Use Manual

Page: 9 / 12

5
The " B " (BIG FONT) mode will produce highly visible labels
using the entire print height on all except 6mm labels.
• To create a label in " B " mode use or to move the
cursor under " B " and press ( BFONT lights in display).
• In " B " mode, you can select between condensed, normal or
extended, but all other options are not available.
JUSTIFY
JUST
Labels are normally printed with the text left-justified. On
2-line labels, press
JUST
to select left-justified, right-
justified or centred text, as shown in the display. See
also
LABEL LENGTH .
VERTICAL TEXT
VERT
• Rotates the text through 90° so that the label is printed
, as confirmed by the VERT
indicator in the display.
• Press again to cancel and return to horizontal text.
Note: Vertical text is not available on 2-line labels.
MULTI-LINE PRINTING
• Press to start the next line of text on a 2-line label,
e.g.
This is a two line label in the display will be
printed as:
This is a two
and the display will
line label indicate 2 lines:
Labels can be created as follows:
6mm
1 line small text
9mm
Up to 2 lines
small text
9mm 1 line normal text
12mm
Up to 2 lines
small text
12mm 1 line normal text
The line indicator in the display will confirm the number
of lines in the label.
BOXED/UNDERLINED PRINTING
BOX/UL
• If no Box/Underline option has been selected, pressing
BOX/UL
once will display the menu below:
Underlined -
—
= DYMO
Square Box - =
Pointed Box - =
Round Corners - =
ZigZag Box - =
Shaded Box - =
v e r t i c a l l y
19mm
Up to 2 lines
small text
19mm 1 line normal text
2
3
• Use or to move the cursor under the desired
option. Either press to select the option (confirmed
by the or — indicator displayed), or
DEL
to exit .
• When the or — indicator is displayed, press
BOX/UL
to cancel the Box/Underline option.
LABEL LENGTH
LTH
The length is normally calculated automatically,
according to the length of the text on the label.
The label length function displays the last used fixed label
length, eg:
45mm 10 1
• Press
DEL
to exit the length function without changing
the length, or:
• Use or to increase (5000mm / 196.85
inches max.) or decrease the length in 1mm / 0.4 inch
steps, or or to increase or decrease the length in
10mm / 0.4 inch steps. The minimum fixed label length
is 45mm.
• Press to fix the length for all subsequent labels,
confirmed by the
LTH SET indicator in the display.
• Press
LTH
to cancel the fixed length and restore the
automatic length.
• If the fixed length is too short for the text, when you
press
PRINT
or +
CAPS
PREVIEW
the display will show how
much longer the label is than the fixed length, eg:
and it will not print. Either cancel the fixed length (see
above), or press
LTH
twice and use to increase
the length; the label is now long enough and can be
printed.
MULTIPLE COPIES +
STYLE
COPIES
• Your LabelManager can provide multiple copies within
the range 1-99.
• To use this facility press then
STYLE
COPIES
to show the last
number of copies set on the display, for example
# = 03
. Use or to increase or decrease
the number of copies required, then press to
confirm ( COPIES indicator lights in the display). To
print the desired quantity press
PRINT
.
• To cancel an existing multiple copies setting, press
+
STYLE
COPIES
.
Note: A row of vertical dots will print between each label
as a cutting guide.
INCREMENTAL NUMBERING
Labels can be printed in increments of 1 automatically.
• Key in your starting number as the right most digit on
the label. Press then
PRINT
1,2,3
...n
the display will
automatically move up a digit to the next number.
•
•