12 |
WID EC U RE
®
C ON VEYO R U SER GU ID E
D YMAX. C O M
Figure 9. Mesh Plate Gap
Operating the Conveyor
1.
Using the Main Power Switch located on the Front Panel, turn on the main power to the conveyor (Figure 10).
2.
Press the Reset Switch on the Front Panel to turn on the Safety Relays.
Figure 10. Main Power Switch & Reset Switch
3.
Make sure the foam used to support the lamps during the shipping process has been removed.
4.
From the HMI Screen, press the Home Button to home the lamp stage. Once homed, move the Lamp to the desired height
setting
by pressing the “Move” section on the
screen.
5.
Select a power level setting and a belt speed. The Start Button will not appear until all of these choices have been made.
Main Power
Switch
Safety Circuit Reset Switch
