TM-022 PN 35934
Rev 05/12/98
8
PC-3D
UNPACKING & INSPECTION
Upon receipt of the unit, unpack and check for shipping damage. Report damage to
freight carrier and make any claim for damage through them.
Check box for contents:
❑
1 - Light-Welder PC-3D Light Source
❑
1 - Lamp/Reflector Assembly
❑
1 - Power Cord
❑
1 - Liquid Light Guide
❑
1 - Filter Assembly *
❑
1 - Pair UV Goggles
❑
1 - Instruction Manual
❑
1 - Warranty Card
❑
1 - 1/8" Hex Wrench *
❑
1 - 1/16" Hex Wrench *
❑
1 - 5/64" Hex Wrench *
❑
1 - 10 mL Syringe Adapter Assembly
❑
1 - Hand-held Manifold *
❑
1 - Assortment of Needles (Quantity of 10)*
❑
1 -
Quick Disconnect 1/8” Female NTB Air Connector *
❑
1 -
Quick Disconnect 1/8” Male NTB Air Connector *
❑
3 - 10 mL Syringe Adapter Seal *
* These parts make up the PC-3D Accessory Kit P/N 35950
NOTE
REPORT ANY SHORTAGE TO DYMAX CORPORATION CUSTOMER SERVICE:
Phone: (860) 482-1010 or (877) 396-2988
Fax: (860) 496-0608 or (800) 482-1012
Light Sources are shipped with the lamp removed to prevent breakage. (Refer to Page 9,
LAMP REPLACEMENT/INSTALLATION
)