background image

 

 

Dymax BlueWave® LED Prime UVA User Guide 

Introduction 

Introduction to the User Guide 

The enclosed 

BlueWave LED Prime UVA

 Spot-Curing System was developed and manufactured by the Dymax 

team, driven by a desire to best serve your needs. Before shipping, your 

BlueWave LED Prime UVA

 was 

thoroughly checked and tested for trouble-free performance. 

The proper setup and operation of this system will maximize safety and user-friendly performance, providing 
optimum yield of your technological process. 

Therefore, we encourage you to read, understand, and follow all safety and operating instructions and 
recommendations compiled in this and other related manuals

 prior to setting up and operating this new 

spot-lamp system or its individual components. 

If you encounter a problem, have any questions, or have a suggestion or recommendation, please contact our 
Technical or Customer Service Departments at 860-482-1010. Trained Dymax professionals are standing by to 
serve you.   

Par conséquent, nous vous encouragez à lire, comprend, et suivre tout sécurité et inst

ructions d’opération 

et conseillations rédiger dans cette et autre manuels etablir un lien 

avant de mettre en place et de faire 

marcher cette nouveau système de lampe de tache ou cette composants individuel.  

Si vous rencontrez un problème, avait n’importe

 de questions, ou si vous voudrez de nous aider avec tes 

suggestions ou conseillations, s’il vous plait contacte notre 

départements technique ou service client à 860-

482-1010. Dymax formé professionnels attendre à vous servir.  

Intended Audience 

Dymax prepared this user guide for experienced process engineers, technicians, and manufacturing personnel. 
If you are new to UV light-curing systems and do not understand the instructions, contact Dymax Application 
Engineering to answer your questions before using the equipment. 

Where to Get Help 

Dymax Customer Support and Application Engineering teams are available in the United States, Monday 
through Friday, from 8:00 a.m. to 5:30 p.m. Eastern Standard Time. You can also email Dymax at 

[email protected]

. Contact information for additional Dymax locations can be found on the back cover of this 

user guide. 

Additional resources are available to ensure a trouble-free experience with our products: 

 

Detailed product information on 

www.dymax.com

 

 

Dymax adhesive Product Data Sheets (PDS) on our website 

 

Material Safety Data Sheets (MSDS) provided with shipments of Dymax adhesives 

Summary of Contents for BlueWave LED Prime UVA DX-1000

























Reviews: