10
Dymax BlueWave® 75 User Guide
Figure 3.
BlueWave 75
Unpacking Diagram
NOTE: Units are shipped with the Bulb/Reflector installed
Installation and System Interconnect
1.
Connect the Power Cord to the back of unit and plug the other end into a grounded wall outlet.
2.
Connect the Footswitch to the connection in the back of the unit. A Ground Stud is provided on the back
of the unit if additional grounding is desired.
Figure 4. Rear Cable Connections
3.
Remove the protective end caps from the Lightguide (purchased separately). Visually inspect the two ends
to verify that no foreign material is present. If required, the ends of the Liquid-Filled Lightguide can be
cleaned with isopropyl alcohol to remove oils and debris. Attach the Lightguide by removing the shipping
Power Cord
Ground Stud
Footswitch
