Home Alarm System User Manual
35
7.3 Delete the message
Disarm the system and enter into “Menu”
→
“Program”
→
“outgoing Message”
→
“Delete”
8.
Monitoring Center
The Standard ADMECO Contact ID Protocol was used in the Alarm System.
Firstly, You need to get a telephone number & User ID from your Service Provider .And input them
into the Alarm Host. In addition, Setting up the Host to upload Alarm Data & Arm/Disarm Data is
needed. Now your Service provider can Monitor your alarm System for you.
Here are the operation steps .
Disarm the system and touch “Menu”
→
Enter into “Program”—“Monitoring Center”, page up and
down on the panel and you will see a whole menu for monitoring center.
8.1 Monitoring Center Number
The system can accept 2 monitoring center phone numbers at most .Make sure that the mobile
number is no longer than 20 digits. Here are the operation steps.
