GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM
21 22
the corresponding indicator lamp stays on. Then this function is
successfully activated.
Operation on the main device: press the [
] key to set the main device
to the Home Arming status.
Operation by the remote controller: press the [
] key on the remote
controller.
Disarming
If this function is activated, the main device is out of alarm state. There
are two conditions to enter this state: 1. normal disarming after arming; 2.
disarming to stop an alarm. After disarming, the zones (excluding the 24h
zones) are idle.
Setting steps: input the [User Password] and press the [#] key to
confirm. After the [Away] or [Home] indicator lamp goes off, the function
is successfully activated.
Operations by the remote controller: press the [
] key on the remote
controller.
Operations on the main device: [User Password] + [#]
Answering Call Alarm
After the main device gives an alarm, it makes a warning tone at once;
and auto dials the first preset mobile phone to make a voice alarm. If
nobody answers the phone call, the main device will auto dial the next
preset phone number and repeat the above process. It will call the 3 preset
numbers circularly for 3 rounds, with three calls for each preset phone.
If you answer the phone, the alarm recording will be delivered. At the
moment, you can activate different functions by your phone keypad:
Hang up: the main device will conduct the same operations as the
situation of no answer.
Press the [*] key: you can read the alarm SMS message.
Press the [1] key: the main device will stop the alarm, stay arming, and
stop dialing.
Press the [2] key: the main device will stop the alarm, stay in disarming,
and stop dialing.
Press the [3] key: the main device will turn off the warning ring and enter
listen-in state for 30s; if you need to extend the listen-in time, press the [3]
key again. You can check whether there is abnormal noise or any invader at
your home.
Press the [4] key: start the spot intercom function for 30s.
Remote Control
Dial the phone number bound with the main device by your cell phone;
after the preset ringtone times, you will hear the warning tone of “Please
input your password”. At the moment, input your password, if the password
is correct, and you will hear the voice prompt of “Press 1 for arming; 2 for
disarming, 3 for listen-in, and 4 for intercom”; if incorrect, you will hear the
warning tone of “your password is wrong, pleas enter it again”. In this
function, you can conduct remote control operations through the cell phone
keypad.
Press the [1] key: the main device will enter the arming state, and you
will hear the warning tone of “The System is on arming” from the handset.
Press the [2] key: the main device will enter the disarming state, and you
will hear the warning tone of “The System is on disarming” from the
handset.
Press the [3] key: the main device will enter the 30s listen-in state; to
extend the listen-in time, you can press the [3] key again to get another 30s
for listen-in.
Press the [4] key: start the intercom function for 30s.
