Page 12
Figure 4-5
4. Place the Projector Plate over the Projector Legs
(10)
and align the mounting holes as
shown. Tighten Hex Screw M5x8mm using Allen Wrench 4mm supplied.(
See Figure 4-4
)
5. Once this is done, thread the Leg Post Cover
(3)
over Leg Post Assembly. (
See Figure
4-5
)
6. Connect the projector mount assembly to ceiling plate as shown. (
See Figure 4-6
) by
insert the pin on the projector plate into the slot in the Ceiling Mount Assembly Head to
lock the projector mount assembly.
Figure 4-4
Figure 4-6
