Page 11
Step
【
4
】
Attaching Projector Plate to the Projector
1. Determine the diameter of the Leg Posts
(4, 5, 6, or 7)
your projector requires by hand
threading them to the Projector. (
See Figure 4-1
)
2. Before you assembly the Projector Legs
(10)
, ensure that the Leg Post must be firmly
attached into Projector. Then, proceed to thread the Projector Legs
（
10
）
onto Leg Post as
shown. (
See Figure 4-2
)
3
．
To make Projector Leg adjustments, loosen the screw with supplied Allen Wrench 4mm
（
12
）
and adjust to your desired position. Re-tighten the screw firmly. (
See Figure 4-3
)
Figure 4-1
Figure 4-2
Figure 4-3
