7
3. Attach the Upright Pole
(5)
to the Base
(3)
. Turn and tighten by hand so the Upright
Pole assembly is firmly in place. Once the Upright Pole is in position, proceed to tighten
the Hex Screws M6x5mm using Allen Wrench 3mm
(14)
provided to secure the Upright
Pole.
4. Feed the cables through the Cover. Place the Cover over Upright Pole
(5)
and cables
should be completely inserted through the mounting surface as shown. (
See Figure 1-4
)
Ensure to leave enough slack in the cables to allow for movement of the monitors.
Figure 1-3
Figure 1-4
Summary of Contents for DE9E2S-G
Page 1: ......
Page 4: ...4 Supplied Parts ...
