11
3. Place the Mount Bracket
(1)
on the back of display, follow by position and orient the
mounting holes so that the mounting holes on the Mount Bracket and display
mounting holes are aligned.
4. Use Spacer
(8)
for recessed mounting hole. Attaching the Mount Bracket
(1)
to the
display monitor and determine the diameter of the Screws
(10
、
12)
, you requires by
hand threading them through the Mount Bracket holes, corresponding with Spacer
(8)
and finally into the back of the monitor. (
See Figure 3-3
)
5. Proceed to tighten with Philips Screwdriver. Stop immediately if you encounter any
resistance. (
See Figure 3-4
)
Figure 3-3
Figure 3-4
Summary of Contents for DE9E2S-G
Page 1: ......
Page 4: ...4 Supplied Parts ...
