Page
7
Step
【
1
】
Installation of Desk Clamp
Do not over-tighten screws. Stop immediately when you encounter any resistance.
Note:
A Phillips screwdriver may be needed to complete the following steps.
Note:
We recommend installing the desk clamp or grommet near the edge or towards the
rear of the desktop surface. Desk clamps should be installed on square-edged desks only.
It is the installer's responsibility to ensure that the desktop can support the total weight of
the mount.
Installation method:
1.
Unscrew and remove the grommet plate using the provided 3mm Allen wrench
(See
Figure 1-1)
.
2. Unscrew and remove the smaller L plate using the provided 4mm Allen wrench.
Attach the mounting pole to the larger L plate and tighten the four screws using the
provided 3mm Allen wrench
(See Figure 1-2)
.
Figure 1-1
Figure 1-2
