Page
5
of
10
D2330-060116-V1.1
Warning
Before using the test set / service tool, ensure that the AC power supply is switched off before
removing the lid and plugging in the test cable.
Programmer Menus
Main Menu
This menu selects the various functions of the test set. When the test set is first switched-on a screen with the
software version is shown briefly in the lower right hand corner
(‘nnn’
on the illustration below). Pressing the
up/down arrows steps through the functions. Pressing enter will select the menu of interest.
Dycon
D2430 Series
Test Set
3DL test set nnn
Turn Off
Information
Measurements
Commands
Faults and Status
Calibration
Advanced Information
Refer to manual
For details
Measurements
The measurement menu is used to select the various voltages, currents generated by the power supply and the
battery impedance in ohms. The menu is accessed by pressing enter when
‘Measurements”
’ prompt is
shown:
PSU Current
Measurements
Measurement Menu
Battery Impedance
Measurement Menu
PSU Voltage
Measurements
Measurement Menu
Output Currents
Measure Amps Menu
Battery Charging
Current
Measure Amps Menu
Battery Voltages
Measure Volts Menu
Output Voltages
Measure Volts Menu
Charging Voltage
Measure Volts Menu
Summary of Contents for D2330
Page 2: ...D2330 060116 V1 1 ...
