DYACON
®
, Inc
When re-routing the cable through the mounting adapter, be careful to avoid damaging the
cable jacket.
1. Slide the mounting adapter over the pipe.
2. Align the clamping screw to north.
For convenience, an initial north position is calibrated at the factory. However, the north
position can easily be set to any position using a Modbus instruction. When WSD-1 is used
with the Mi-Met controller, north is set with a simple button press.
3. Tighten the locking screw.
Mi-Met WSD-1 Manual
12
Image 2: Internal and external cable route. North direction
indicator.
North
