Dyaco XE515SD-YE005, Service Manual

Page: 75 / 92

S
S
e
e
r
r
v
v
i
i
c
c
e
e
M
M
a
a
n
n
u
u
a
a
l
l
(4) Use #12 and #13 open end wrench affix swing arm assembly and remove Hex Head
Bolt 5/16”x1-1/4”, flat washer 5/16”x20x1.5T and nyloc nut 5/16”x7T. Remove swing
arm assembly.
(5) To take apart the swing arm assembly, use#12 and #13 open end wrenches to
release three Hex Head Bolts 5/16" x 1-3/4" together with three nyloc nut 5/16" x
7T, and two curve washers 5/16"x 23 x 1.5T and separate upper Swing Arm and
lower Swing Arm from each other.
(6) To take apart the Handle Switch Bracket, tear off Handle Switch sticke first then use
Phillips head screw driver to release two Flat Head Socket Screws M5×20mm and
the Handle Switch Bracket, handlebar resistance cable or incline cable can be taken
apart.
(7)
Reassemble in the reverse order as disassembly