Model XE528s
Work Troubleshooting
Parts
5 Left and Right Handlebars
Rev
Procedures
：
1.
There is a 0.05mm~0.07mm
tolerance for the Handlebar on its
shaft for moving smoothly of the
Handlebar so that a small amount of
play is normal. However, as time
lasts there might be noises, which
are caused by parts wearing out.
Applying some grease on
ψ
25x
296L shaft on the mast, as shown in
figure 1, might resolve the problem.
2. If the bearing makes noise or gets
stuck, replace this 6005 as shown in
figures 2 and 3.
1
2
3
