Model XE528s
Work
Disassembling and Replacing
Parts
10 Bushing Housing
Rev
Procedures
：
1.
Follow procedures 2 and 3 to take
apart Connecting Arm and Pedal
Arm.
2.
Use 12 mm wrench to release 5/16"
x 15m/m hex head bolt and 5/16" x
35 x 1.5T flat washer and take off
Bushing Housing, as shown in figure
1.
3.
To resume, be sure to put
ψ
25
wave washer on the shaft and apply
some lubricant prior to returning
Bushing Housing onto the shaft.
Return and tighten 5/16" x15m/m
hex head bolt and 5/16" x 35 x 1.5T
flat washer, as shown in figures 2
and 3.
4. Follow procedures 3~4 and 2~5 to
resume Pedal Arm and Connecting
Arm.
1
2
3
