- 3 -
5
6
8
Remove lavatory and apply silicone sealant to the
inside of the traced pencil line of the marble top.
770283-100 (2/2020)
1/2 MIN.
Clip
Brass insert
#10-32 Machine screw
Place lavatory back onto underside of marble top
(4)
within the traced
pencil line. Further attach the sink to the marble top using the supplied
sink clips and screws at 4 corner locations to hold lavatory in place.
Carefully tighten all 4 screws alternately, do not overtighten.
Clean off any sealant that may have run out.
Place assembled metal console frame
(1, 2 & 3)
upside
down over marble top
(4)
and lavatory ensuring rear of
console is positioned to the rear of the marble top. (The
rear of the metal console frame can be identified by a
slight opening on the top of the console frames tubing,
this is the rear. Refer to section 2)
7
Ensure marble top and lavatory are still upside down and squarely
sitting on the cardboard spacer.
This will aid installing the assembled metal console frame
(1 & 2)
to
the marble top when installing mounting screws.
REAR OF CONSOLE
AND MARBLE TOP
