background image

- 1 -

INSTALLATION INSTRUCTIONS

Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017

SA

VE FOR FUTURE USE

RECOMMENDED TOOLS AND MATERIALS

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing 
supply stores. It is essential that the tools and materials be on hand before work has begun.

M965703 1.0 (5/17)

Cross Handle 

Model D3510184C 
Lever Handle 

Model D3510180C

Ashbee

 

Widespread Lavatory Faucets 

Plumbers' Putty or Caulking

Adjustable Wrench

Phillips Screwdriver

Channel Locks

Tubing Cutter

Flat Blade Screwdriver

Basin Wrench

ROUGHING-IN DIMENSIONS: 

• For reference

1-1/4" MAX.

(32 mm)

1-1/16" DIA.

(27 mm)

1-1/4" O.D.

(32 mm)

2-3/4" DIA.

(70 mm)

3-1/8"

(78 mm)

6" TO 12" MAX.

(152 to 305 mm)

3-5/8"

(92 mm)

3-1/2"

(90 mm)

1-1/2" MAX.

(38 mm)

2" MAX.

(51 mm)

6-1/8"

(150 mm)

5-1/8"

(130 mm)

3"

(70 mm)

2-1/8" DIA.

(54 mm)

7-1/2" MAX.

(191 mm)

7/8" DIA.

(22 mm)

CROSS

HANDLE

STRAIGHT

LEVER

HANDLE

NOTE: MOUNTING HOLES ARE 1-3/8" DIA. (35 mm)

CONNECTIONS:

• 1/2" IPS FLEXIBLE SUPPLIES

• 3/8" O.D. BULL-NOSE RISERS

In the United States:

DXV

One Centennial Avenue 

Piscataway, New Jersey 08855

Attention: Director of Customer Care

For residents of the United States, warranty 

information may also be obtained by calling 

the following toll free number: (800) 227-2734

www.DXV.com

In Canada:

DXV 

5900 Avebury Road  

Mississauga, Ontario  

L5R 3M3 

Canada

Toll Free: 1-800-387-0369

Local: 905-306-1093 

Fax: 1-800-395-1498 

www.DXV.ca

In Mexico:

DXV 

Via Morelos 330 

Col. Santa Clara Coatitla  

Ecatepec, Estado de México 55540

Toll Free: 01-800-8391200

www.DXV.mx

Thank you for selecting DXV. To ensure that your 
installation proceeds smoothly, please read these 
instructions carefully before you begin.

Summary of Contents for Ashbee D3510184C

Page 1: ... MAX 152 to 305 mm 3 5 8 92 mm 3 1 2 90 mm 1 1 2 MAX 38 mm 2 MAX 51 mm 6 1 8 150 mm 5 1 8 130 mm 3 70 mm 2 1 8 DIA 54 mm 7 1 2 MAX 191 mm 7 8 DIA 22 mm CROSS HANDLE STRAIGHT LEVER HANDLE NOTE MOUNTING HOLES ARE 1 3 8 DIA 35 mm CONNECTIONS 1 2 IPS FLEXIBLE SUPPLIES 3 8 O D BULL NOSE RISERS In the United States DXV One Centennial Avenue Piscataway New Jersey 08855 Attention Director of Customer Care...

Page 2: ...CKNUT 8 using wrench Tighten COUPLING NUT 12 on SUPPLY HOSE 14 to OUTLET 13 making water tight connection Important Loop SUPPLY HOSES 14 as shown so they do not kink INSTALL HANDLES FOR LEVER HANDLES Install FRICTION WASHER 15 onto base of LEVER HANDLE 2 With VALVE in off position align LEVER HANDLE 2 as shown Install LEVER HANDLE 2 onto VALVE STEM 16 and tighten SET SCREW 7 with HEX WRENCH suppli...

Page 3: ...E 2 into LAVATORY DRAIN 3 From below assemble RUBBER GASKET 4 PLASTIC WASHER 5 and LOCK NUT 6 onto DRAIN FLANGE 2 Do not tighten fully FIG 4b Inspect inside DRAIN BODY 7 that SEAL 8 is installed Thread DRAIN BODY 7 tight against FLANGE 2 to make a water tight seal The PIVOT ROD OPENING 9 in DRAIN BODY 7 should face the rear of the lavatory Tighten LOCK NUT 6 on FLANGE 2 to make a water tight conne...

Page 4: ...141 XXX ROSETTE H960750 XXX POP UP ROD H960742 191 1 2 SIDE VALVE ROUGH CLOCK WISE ON H960279 191 MOUNTING KIT H960295 191 SPOUT MOUNTING KIT H960104 191 1 2 HOT CARTRIDGE H960741 191 1 2 SIDE VALVE ROUGH CLOCK WISE ON M953006 0070A TEE HOSE ASSEMBLY H960758 XXX CROSS HANDLE SET HOT H960551 XXX HANDLE CAP HOT H960526 XXX HANDLE CAP COLD H960759 XXX CROSS HANDLE SET COLD H960136 191 1 2 COLD CARTRI...

Reviews: