- 27 -
Optional Accessory Items
DX Engineering RG-213/U 50 ohm Coaxial Cable 213U
DXE-213U
DXE-213 - Bulk Cable - No Connectors - Sold by the foot
DXE-213U MIL-Spec Cable
DXE-213U-500
DXE-213 - Bulk Cable - No Connectors - 500 foot length
DXE-213UDU003
DXE-213 Cable - PL-259 each end, Tested, 3 foot length
DXE-213UDU006
DXE-213 Cable - PL-259 each end, Tested, 6 foot length
DXE-213UDU012
DXE-213 Cable - PL-259 each end, Tested, 12 foot length
DXE-213UDU018
DXE-213 Cable - PL-259 each end, Tested, 18 foot length
DXE-213UDU025
DXE-213 Cable - PL-259 each end, Tested, 25 foot length
DXE-213UDU050
DXE-213 Cable - PL-259 each end, Tested, 50 foot length
DXE-213UDU075
DXE-213 Cable - PL-259 each end, Tested, 75 foot length
DXE-213UDU100
DXE-213 Cable - PL-259 each end, Tested, 100 foot length
Solid Polyethylene Dielectric
.405 Type II-A jacket is non-contaminating
and UV-resistant, suitable for outdoor use
Direct-bury
Braided copper shield
Direct-bury
DXE-213UDU125
DXE-213 Cable - PL-259 each end, Tested, 125 foot length
DXE-213UDU150
DXE-213 Cable - PL-259 each end, Tested, 150 foot length
DXE-213UDU175
DXE-213 Cable - PL-259 each end, Tested, 175 foot length
DXE-213UDU200
DXE-213 Cable - PL-259 each end, Tested, 200 foot length
DX Engineering RG-213/U is a low-loss, 50 ohm, MIL-spec bulk coaxial cable
with a non-contaminating Type II PVC jacket. Specially manufactured for DX
Engineering, RG-213/U cable is perfect for outdoor use due to its excellent UV
resistance and durability in direct-bury applications. Specially suited for high-
power amateur stations, RG-213/U provides a lower loss solution for long cable
runs at any power level. Featuring a solid polyethylene dielectric, DX Engineering
RG-213/U uses standard PL-259 and N connectors normally designed for RG-8
sized cables.
Attenuation/
100 ft.
Power
Rating
Efficiency
%
0.4 dB @ 5 MHz
4.9 kW
90 %
0.6 dB @ 10 MHz
3.4 kW
87 %
1.0 dB @ 30 MHz
2.0 kW
79 %
1.3 dB @ 50 MHz
1.5 kW
73 %
2.4 dB @ 150 MHz
0.9 kW
57 %
Velocity Factor: 66% (0.66)
Minimum Bend Radius: 5”
DXE-RADP-3 - Radial Plate, Stainless Steel with 20 Sets of SS Radial Attachment Hardware
The
patented
DX Engineering Radial Plate is meant for those of you that have or are building a quarter wave vertical
antenna and who want an easy, neat and effective way to connect those essential radial wires and the coax to your
vertical antenna for the lowest takeoff angle and strongest signals. DX Engineering Radial Plate is laser cut from
tough stainless steel so that it has smooth edges, won’t corrode and will always look good. You will be proud of how
good your installation looks. This plate will work perfectly with most commercially available vertical antennas such
as the Hustler® BTV series (4-BTV thru the 6-BTV), the SteppIR™ (BiggIR or SmallIR) or one of your own
construction.
DXE-SSVC-2P - Stainless Steel V-Clamp for steel pipe, 2 inch V-bolt
This V-Clamp is made in one size that fits Steel tubing or pipe from 1" to 2'' OD as used in antenna construction. The
supplied V-bolt is long enough to attach tubing to thick plates and is made with anti-corrosive properties. The special
Stainless Steel saddle has serrated teeth will clamp to the pipe securely by biting into the surface. For this reason, it is not
recommended for softer aluminum tubing or pipe. Ideal for fastening a radial plate and antenna mounting to a steel pipe.
Used to clamp 1 to 2'' (OD) steel tubing or pipe
Designed for attachments that don't require resistance to torque
V-bolt and saddle made from high-strength 18-8* stainless steel
The use of an anti-seize compound is HIGHLY recommended to achieve proper torque and prevent galling.
